Home › Pico PIO Fast TFT Nursery Climate Display Kit: ILI9341
Baby Room Comfort Monitor Kit v19 - Compoden
In Stock

Pico PIO Fast TFT Nursery Climate Display Kit: ILI9341

SKU: CDN-KIT-3986-SLD Brand: Compoden Category: Electronics > Mini & Nano Form Factor > Project Kits
Rs. 1,860.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 90230090
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

Pico PIO Fast TFT Nursery Climate Display Kit: ILI9341 — an advanced-level kit.

Pico PIO Fast TFT Nursery Climate Display Kit: ILI9341

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.

Difficulty: Advanced Build Time: 5-6 hrs Skill: PIO State Machine SPI

Kit at a glance

What you build: A fast nursery climate display: a Raspberry Pi Pico drives an ILI9341 TFT through a PIO state machine instead of software, so the temperature and humidity (DHT22) graphs redraw quickly. An MPU6050 adds motion, for example to wake the screen when the display is picked up.

What's in the box

  • Raspberry Pi Pico
  • 2.4in TFT ILI9341
  • DHT22
  • MPU6050
  • 4.7kΩ Resistors × 5
  • PCB Prototype Board × 2
  • Micro USB Cable
  • Soldering Iron
  • Solder Wire

Power: USB. A USB charger is not included.

Skill level: Advanced (5-6 hours).

Frequently asked questions

What is PIO?

Small programmable state machines in the Pico that run their own I/O, freeing the main cores.

Is it a baby monitor?

No. It shows room climate only.

By exploiting the Raspberry Pi Pico’s PIO peripheral to generate a hardware-accurate SPI bus at 62.5MHz, this kit pushes the ILI9341 TFT to its limits, rendering humidity, temperature, and motion data without perceptible lag.

What You'll Build

You assemble a compact comfort monitor that reads air temperature and humidity via the DHT22 and detects tilt or movement through the MPU6050 accelerometer/gyroscope. The entire circuit runs from a single Micro USB cable — mount it next to the crib or on the nursery wall.

What You'll Learn

  • Implement hardware SPI with a PIO state machine on the Raspberry Pi Pico at 62.5MHz
  • Read one-wire DHT22 and I²C MPU6050 sensors in a real-time embedded loop
  • Solder surface-mount and through-hole components reliably on a PCB prototype board

Kit Contents

Component Quantity
Raspberry Pi Pico 1
2.4in TFT ILI9341 1
DHT22 1
MPU6050 1
4.7kΩ Resistors 5
PCB Prototype Board 2
Micro USB Cable 1
Soldering Iron 1
Solder Wire 1

Who This Kit Is For

The build demands prior experience with C/C++ and basic circuit assembly — it’s not a beginner-friendly kit.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.

What if I get stuck during the build?

Open the AI companion through the QR code; it recognizes each step and offers immediate debug help. For hardware-level hangs, our WhatsApp support sees real-time photos and guides you through fixes.

What if my DHT22 readings look inaccurate?

Ensure the 4.7kΩ pull‑up resistor is correctly placed between VCC and the data line. The AI companion includes a sensor verification routine that checks raw signals and suggests wiring fixes.

Is the soldering iron suitable for these tiny pads?

Yes, the included iron has a fine chisel tip and temperature control suitable for both through-hole and small SMD pads on the ILI9341 breakout. We also include enough solder wire for the full project.

Choose your assembly option:

  • Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
  • Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →

How to set up your kit

See all how-to videos →