Long-Range Room Monitor Kit: 2× ESP32, RA-02 LoRa, DHT22
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Long-Range Room Monitor Kit: 2× ESP32, RA-02 LoRa, DHT22 — an expert-level kit.
Long-Range Room Monitor Kit: 2× ESP32, RA-02 LoRa, DHT22
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A long-range room monitor: a battery ESP32 with an RA-02 LoRa radio in a room beyond Wi-Fi, such as a garden room or outbuilding, sends temperature, humidity and pressure up to around a kilometre in open ground to a second ESP32 indoors, which shows them and passes them on over Wi-Fi.
What's in the box
- ESP32 Dev Board × 2
- RA-02 LoRa SX1278 × 2
- DHT22 × 2
- BMP280
- 0.96in OLED × 2
- 433MHz Antenna × 2
- LM2596 Buck Converter × 2
- 18650 Cell × 2
- 18650 Holder × 2
- 100nF Caps × 10
- 10µF Caps × 5
- 4.7kΩ Resistors × 5
- 10kΩ Resistors × 10
- PCB Prototype Board × 4
- Waterproof Enclosures × 2
- Soldering Iron
- Solder Wire
Power: two 18650 cells included.
Skill level: Advanced (8-10 hours).
Frequently asked questions
Is it a baby monitor?
No. It reports room climate only.
How far does it reach?
Up to about a kilometre in the open; walls cut that a lot.
This kit gives you the tools to build a long-range LoRa sensor network that monitors these parameters from over a kilometer away, without depending on your home WiFi for transmission. The gateway collects sensor data and uploads it to the cloud, so you can check conditions on your phone from anywhere.
What You'll Build
You'll assemble two battery-powered sensor nodes that stream telemetry via 433MHz LoRa to an ESP32-based gateway. The gateway connects to WiFi and pushes data to a cloud platform (like a phone dashboard app or a cloud chart service) for real-time dashboards and alerts.
What You'll Learn
- Assembling an ESP32 LoRa transmitter/receiver pair using SX1278 modules
- Interfacing DHT22 and BMP280 sensors for environmental monitoring
- Managing 18650 battery power with buck converters for field deployment
- Programming cloud connectivity via WiFi and MQTT/HTTP for remote dashboards
Kit Contents
| Component | Quantity |
|---|---|
| ESP32 Dev Board | 2 |
| RA-02 LoRa SX1278 | 2 |
| DHT22 | 2 |
| BMP280 | 1 |
| 0.96in OLED | 2 |
| 433MHz Antenna | 2 |
| LM2596 Buck Converter | 2 |
| 18650 Cell | 2 |
| 18650 Holder | 2 |
| 100nF Caps | 10 |
| 10µF Caps | 5 |
| 4.7kΩ Resistors | 5 |
| 10kΩ Resistors | 10 |
| PCB Prototype Board | 4 |
| Waterproof Enclosures | 2 |
| Soldering Iron | 1 |
| Solder Wire | 1 |
Who This Kit Is For
If you've tinkered with Arduino or ESP32 and want a reliable, long-range wireless sensor network, this kit delivers a production-grade reference design.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code in the kit to access our AI companion, which provides step-by-step instructions specific to this project. You can also reach us on WhatsApp for direct help from our engineers.
Will the LoRa signal work through walls and floors in a typical Indian home?
Yes, the 433MHz LoRa band penetrates multiple concrete walls easily. In our tests across Bangalore apartments, the signal maintained reliable communication beyond 1km indoors and outdoors.
How do I view the data on my phone?
The ESP32 gateway connects to your home WiFi and can upload data to free cloud platforms like a phone dashboard app or a cloud chart service. We provide sample code to set up a dashboard accessible from any smartphone browser.
Can I add more sensor nodes later?
Absolutely. The kit uses a star network topology; you can expand by adding more ESP32+LoRa sensor nodes with the same frequency. The gateway can be programmed to handle multiple nodes.
Gateway uploads to cloud via ESP32 WiFi.
What's in this kit
- ESP32 Dev Board x2
- RA-02 LoRa SX1278 x2
- DHT22 x2
- BMP280
- 0.96in OLED x2
- 433MHz Antenna x2
- LM2596 Buck Converter x2
- 18650 Cell x2
- 18650 Holder x2
- 100nF Caps x10
- 10µF Caps x5
- 4.7kΩ Resistors x5
- 10kΩ Resistors x10
- PCB Prototype Board x4
- Waterproof Enclosures x2
- Soldering Iron
- Solder Wire
Choose your assembly option:
- Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items