Nursery Air + Comfort Indicator Kit: Uno, MQ-135, DHT22
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Nursery Air + Comfort Indicator Kit: Uno, MQ-135, DHT22 — an intermediate-level kit.
Nursery Air + Comfort Indicator Kit: Uno, MQ-135, DHT22
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A nursery air quality indicator: an MQ-135 gas sensor, a DHT22 and a BMP280 feed an Arduino Uno that combines them into a simple comfort and air score shown on an OLED, so you know when to open a window.
What's in the box
- Arduino Uno R3
- MQ-135 Gas Sensor
- DHT22
- BMP280
- 0.96in OLED
- 10kΩ Resistors × 10
- 4.7kΩ Resistors × 5
- 100nF Caps × 10
- 400-pt Breadboard
- M-M Wires × 25
- 9V Battery Snap
Power: 9V battery, not included. The MQ-135 heater drains a 9V battery quickly; a USB or DC adapter suits it better.
Skill level: Intermediate (3-4 hours).
Frequently asked questions
Is the score an official AQI?
No. An MQ-135 gives a relative reading, not a certified air quality index.
Is it a baby monitor?
No. It shows room air and climate only.
What You'll Build
You’ll assemble a desktop monitor that reads temperature, humidity, barometric pressure, and air quality, then processes the readings into a single composite air quality level score. The OLED display shows the score with a colour background that immediately signals nursery conditions.
What You'll Learn
- Calibrate an MQ-135 gas sensor for indoor air quality measurements
- Interface DHT22 and BMP280 with Arduino Uno via I2C and digital pins
- Implement a weighted formula to compute composite air quality level from multiple sensor values
- Program OLED display with shaded zones using Arduino libraries
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Uno R3 | x1 |
| MQ-135 Gas Sensor | x1 |
| DHT22 | x1 |
| BMP280 | x1 |
| 0.96in OLED | x1 |
| 10kΩ Resistors | x10 |
| 4.7kΩ Resistors | x5 |
| 100nF Caps | x10 |
| 400-pt Breadboard | x1 |
| M-M Wires | x25 |
| 9V Battery Snap | x1 |
Who This Kit Is For
Designed for CBSE students building practical science projects, B.Tech ECE/EEE undergraduates working on sensor integration, and ATL Tinkering Lab mentors looking for a ready-to-assemble environmental monitoring project. Perfect for Smart India Hackathon prototypes or mini-project submissions.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code on the box to open your AI build companion, which has diagrams, wiring checks, and code debugging steps tailored to this kit. If the AI doesn’t solve it, message us on WhatsApp for a human assist.
How accurate is the composite air quality level for a room?
The MQ-135 responds to ammonia, alcohols, and VOCs commonly found in nurseries. Combined with humidity-corrected temperature from DHT22 and pressure from BMP280, the formula produces a relative air quality level that reliably flags deteriorating air conditions, but it’s not a substitute for calibrated industrial monitors.
Can I power this with a USB adapter instead of a 9V battery?
Yes, the Arduino Uno can take USB power from any standard 5V adapter. The kit includes a battery snap for portability, but you can skip it if you want a permanent setup.
Will the sensors detect smoke or cooking fumes from the kitchen?
The MQ-135 is sensitive to a wide range of gases, so it may pick up cooking fumes if the nursery is adjacent to the kitchen. We recommend placing the monitor away from direct airflow and letting it establish a baseline for your room.
What's in this kit
- Arduino Uno R3
- MQ-135 Gas Sensor
- DHT22
- BMP280
- 0.96in OLED
- 10kΩ Resistors x10
- 4.7kΩ Resistors x5
- 100nF Caps x10
- 400-pt Breadboard
- M-M Wires x25
- 9V Battery Snap
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items