BMI Calculator Watch Kit with Arduino Nano + 0.96in OLED
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
BMI Calculator Watch Kit with Arduino Nano + 0.96in OLED — a beginner-level kit.
BMI Calculator Watch Kit with Arduino Nano + 0.96in OLED — Build a Wearable Health Monitor
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Ever wondered how fitness trackers calculate BMI? With this kit, you'll assemble a wearable watch that lets you input height and weight with buttons and instantly displays your BMI and health category on an OLED screen. This project introduces electronics and coding in one afternoon. It is a learning prototype, not a medical device.
What You'll Build
A fully functional BMI calculator wristband that responds to button presses, computes BMI from stored height and weight inputs, and classifies the result as underweight, normal, overweight, or obese—all on a crisp OLED display. It's a real-world wearable that demystifies health tech.
What You'll Learn
- How to interface an OLED display with Arduino Nano using I2C
- Reading multiple button inputs with pull-down resistors to avoid floating pins
- Writing C++ code for BMI calculation logic and health classification
- Assembling a wearable circuit on a breadboard and planning for a wrist-worn form factor
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Nano | 1 |
| 0.96in OLED | 1 |
| Tactile Button | 3 |
| 10kΩ Resistors | 5 |
| 400-pt Breadboard | 1 |
| M-M Wires | 15 |
| 9V Battery Snap | 1 |
Who This Kit Is For
Perfect for CBSE students diving into wearable tech for science fairs, ATL Tinkering Lab innovators, and electronics enthusiasts attending summer camps. Even parents and educators looking for a guided, safe introduction to health-monitoring wearables will appreciate the step-by-step AI companion.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
The AI companion provides instant troubleshooting; you can also send a WhatsApp message for human backup and get a reply.
Can I wear this watch after building it?
The breadboard circuit is not waterproof or rugged, but you can mount it on a wristband for demonstration and school exhibitions.
Does the kit include a battery for portable use?
The 9V battery snap is included; you need to provide a standard 9V battery to power the watch on the go.
Is coding experience required for this kit?
No, the AI companion provides pre-written code and explains each line, so even a beginner can upload and understand the logic.
Buttons enter height and weight. OLED shows BMI value and healthy range classification.
What's in this kit
- Arduino Nano
- 0.96in OLED
- Tactile Button x3
- 10kΩ Resistors x5
- 400-pt Breadboard
- M-M Wires x15
- 9V Battery Snap
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items