Drone GPS Navigator Kit with ESP32 + Motor
Tethered ESP32 Drone with GPS Waypoint Patrol & Radar Intruder Detection
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
Build a tethered surveillance drone that autonomously patrols a GPS-defined circuit, streaming live video from its ESP32-CAM while dual radar modules detect movement. This project transforms an F450 frame into a persistent security sentinel, ideal for monitoring perimeters, farmhouses, or remote industrial sites.
What You'll Build
You'll construct a fully functional F450 quadcopter that can follow pre-programmed GPS waypoints, transmit real-time video over Wi-Fi, and trigger alerts when the onboard RCWL-0516 radar sensors detect an intruder. The drone remains tethered for reliable control and extended power, making it perfect for long-duration surveillance missions where untethered flight would be risky or restricted.
What You'll Learn
- Calibrating and interfacing NEO-6M GPS module with ESP32 for autonomous navigation along waypoints.
- Configuring dual RCWL-0516 radar sensors for 360-degree motion detection and triggering camera capture.
- Programming ESP32-CAM for live video streaming and wireless image transmission to your control station.
- Assembling, balancing, and tuning a brushless F450 drone with ESC calibration and LiPo power management.
Kit Contents
| Component | Quantity |
|---|---|
| ESP32-CAM | 1 |
| ESP32 Dev Board | 1 |
| NEO-6M GPS | 1 |
| RCWL-0516 Radar Module | 2 |
| ESC 30A | 4 |
| Brushless Motor 2204 | 4 |
| F450 Frame | 1 |
| 3S LiPo 2200mAh | 1 |
| XT60 Connector | 1 |
| NRF24L01 | 2 |
| 100nF Capacitor | 15 |
| 4.7kΩ Resistor | 5 |
| LM2596 Buck Converter | 1 |
| PCB Prototype Board | 3 |
| Soldering Iron | 1 |
| Solder Wire | 1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
This kit is designed for advanced hobbyists, engineering students (B.Tech ECE, EEE, CS) seeking a capstone project in autonomous systems, and researchers at IIT, NIT, VIT, BITS Pilani working on drone-based perimeter security. It’s ideal for Smart India Hackathon teams tackling surveillance challenges or ATL mentors needing a robust demonstration platform.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code on the box to chat with the AI companion trained on this exact project, or message us on WhatsApp for direct engineer support.
Can this drone fly autonomously without a tether?
The drone is programmed for tethered operation to ensure continuous power and stable communication. Modifying for untethered flight would require a different power setup and regulatory approval.
How does the radar system detect intruders, and what is its range?
The dual RCWL-0516 modules provide a wide detection cone and sense motion up to 7 meters. When triggered, the ESP32-CAM captures a snapshot and streams it to your control station.
What safety measures are included for handling LiPo batteries?
The kit includes an XT60 connector and LM2596 buck converter for safe power distribution. Always charge the 3S LiPo with a balance charger and never leave it unattended during charging.
Drone — Tethered ESP32 drone patrols a GPS waypoint circuit and streams live camera feed while radar module detects intruders.
What's in this kit
Choose your assembly option:
- Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Other projects you can build
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items