Home › LPG + CO Sensor Learning Kit: Arduino Uno, MQ-2, MQ-7
Kitchen LPG Gas Alarm Pro Kit with Arduino Uno + Sensor - Compoden
In Stock

LPG + CO Sensor Learning Kit: Arduino Uno, MQ-2, MQ-7

SKU: CDN-KIT-3399-CL Brand: Compoden Category: Electronics > Sensor Starter Kits > Project Kits
Rs. 1,310.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 90230090
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

LPG + CO Sensor Learning Kit: Arduino Uno, MQ-2, MQ-7 — an intermediate-level kit.

LPG + CO Sensor Learning Kit: Arduino Uno, MQ-2, MQ-7

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.

Difficulty: Intermediate Build Time: 4-5 hours Skill: Dual-sensor integration and real-time alert systems

A learning project, not a certified gas, smoke, fire or CO alarm. Fit a certified alarm to protect people or property.

Kit at a glance

What you build: An LPG and CO sensor learning kit: an MQ-2 and an MQ-7 on an Arduino Uno show live readings and the thresholds you set on a 1.8-inch colour TFT, with a buzzer and red LEDs, so you can see how each sensor warms up and responds.

What's in the box

  • Arduino Uno R3
  • MQ-2 Gas Sensor
  • MQ-7 CO Sensor
  • 1.8in TFT ST7735
  • Active Buzzer
  • 5mm Red LED × 3
  • 220Ω Resistors × 5
  • 10kΩ Resistors × 10
  • 100nF Caps × 5
  • 400-pt Breadboard
  • M-M Wires × 25
  • 9V Battery Snap

What You'll Build

An LPG and CO sensor learning kit: an MQ-2 and an MQ-7 on an Arduino Uno show live readings and the thresholds you set on a 1.8-inch colour TFT, with a buzzer and red LEDs, so you can see how each sensor warms up and responds.

What You'll Learn

  • Calibrating MQ-series sensors to return meaningful parts-per-million values instead of just raw ADC numbers
  • Multiplexing two analog sensors on one Arduino and handling asynchronous alert logic
  • Driving an ST7735 TFT display with real-time graphics, colour zones, and numeric overlays

Kit Contents

Component Quantity
Arduino Uno R3 1
MQ-2 Gas Sensor 1
MQ-7 CO Sensor 1
1.8in TFT ST7735 1
Active Buzzer 1
5mm Red LED 3
220Ω Resistors 5
10kΩ Resistors 10
100nF Caps 5
400-pt Breadboard 1
M-M Wires 25
9V Battery Snap 1

Who This Kit Is For

This is built for students who need a project that combines hardware, coding, and real‑world impact.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.

What if I get stuck during the build?

Scan the QR on the box to open your AI build companion — it knows this exact circuit and can walk you through wiring, code, and sensor calibration. WhatsApp and email support is also included.

Do I need to calibrate both sensors separately?

Yes, and the companion provides a calibration sketch that uses clean air and known thresholds. You'll follow a simple routine to get reliable ppm readouts for both MQ-2 and MQ-7 in under ten minutes.

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →

How to set up your kit

See all how-to videos →