Waving Hand Kit: Arduino Uno, SG90 Servo, Push Button
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Waving Hand Kit: Arduino Uno, SG90 Servo, Push Button — a beginner-level kit.
Waving Hand Kit: Arduino Uno, SG90 Servo, Push Button
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A waving hand: press the button and an Arduino Uno sweeps one SG90 servo to wave a cardboard hand, a first lesson in servo angles and timing.
What's in the box
- Arduino Uno R3
- SG90 Servo
- Tactile Button
- 10kΩ Resistors × 5
- 400-pt Breadboard
- M-M Wires × 15
- 9V Battery Snap
Power: 9V battery, not included. A servo drains a 9V battery quickly; 4 AA cells or USB power work better.
Skill level: Beginner (1-2 hours, no soldering).
Frequently asked questions
How many servos?
One. The old title said five, but the kit has one.
Can I make it wave on its own?
Yes, swap the button for a timer in code.
Imagine a simple mechanism that waves hello each time you press a button. This kit guides you in wiring a tactile button to an Arduino Uno, programming it to read the input, and driving an SG90 servo to swing back and forth like a hand waving. It’s a charming first project that demystifies microcontrollers and physical motion. Whether you're learning at home or a teacher running a tinkering lab, this build turns code into a visible, friendly response.
What You'll Build
You’ll assemble a breadboard circuit with a pushbutton and a servo motor, then load a pre-written sketch that makes the servo arm sweep when the button is pressed. The result is a waving hand that responds instantly to touch, perfect for desk-top amusement or demonstrating input/output concepts. The entire project stays on the breadboard, so there’s no soldering required, and all connections are clearly documented.
What You'll Learn
- How to read a digital button press and debounce it in code
- Controlling an SG90 servo’s angular position using Arduino’s Servo library
- Wiring a pull-down resistor to stabilise input signals
- Translating real-world interactions into programmed motor responses
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Uno R3 | 1 |
| SG90 Servo | 1 |
| Tactile Button | 1 |
| 10kΩ Resistors | 5 |
| 400-pt Breadboard | 1 |
| M-M Wires | 15 |
| 9V Battery Snap | 1 |
Who This Kit Is For
Good for makers exploring robotics for the first time, this kit aligns with the CBSE science curriculum and ATL Tinkering Lab activities. B.Tech ECE first-year students can use it as a foundational microcontroller project. Even parents looking for hands-on STEM gifts will find it an ideal introduction to Arduino and servo control.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code or message our WhatsApp support to access the AI companion. It provides step-by-step audio and visual instructions, and our team can help troubleshoot in real time.
What if the servo doesn’t move when I press the button?
Double-check the pull-down resistor connection on the button and ensure the servo’s signal wire is on pin 9. Our AI companion includes a diagnostic mode that will highlight wiring mistakes specific to this circuit.
Can I modify the code to make the hand wave continuously without pressing the button?
Yes, you can edit the Arduino sketch to loop the sweep motion automatically. The AI companion even includes a variant code snippet that does exactly that, teaching you about loop structures and delays.
Single SG90 servo sweeps back and forth to wave like a hand when button pressed.
What's in this kit
- Arduino Uno R3
- SG90 Servo
- Tactile Button
- 10kΩ Resistors x5
- 400-pt Breadboard
- M-M Wires x15
- 9V Battery Snap
Do you deliver across India?
Yes. We ship Waving Hand Kit: Arduino Uno, SG90 Servo, Push Button across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Orders ship in 3-7 days.
What payment options are available for Waving Hand Kit: Arduino Uno, SG90 Servo, Push Button?
We accept UPI, all major debit and credit cards, and Cash on Delivery (COD) available.
Built and shipped from Compoden, with UPI and cards, plus COD available.
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items